Rigid Elements
Rigid Elements
The rigid connection is made using components which differ
depending on the requirement made on them in terms of strength, installation and design.
Rigid panels can be formed using profiles or special clamping profiles.
Panel elements are secured in the profile groove using Cover Profile
or the Lip Seal.
Subsequent fastening of panel elements onto the profile groove of an
existing frame is made possible by means of Multiblocks,
Clamp Multiblocks etc.
Rigid Fastening for Line 6
In conjunction with standard profiles, panel elements can either be mounted in the profile groove or they can be attached offset from the groove with the aid of appropriate components.
Selected Samples
Product #: 0.0.617.63
Table-Top Fastening Set 8
Product #: 0.0.419.58
Multiblock 6 PA, black
Product #: 0.0.431.01
Cover Profile 6, black
Product #: 0.0.439.20
Lip Seal 6 2-4mm, black
Rigid Fastening for Line 8
In conjunction with standard profiles, panel elements can either be mounted in the profile groove or they can be attached offset from the groove with the aid of appropriate components.
Selected Samples
Product #: 0.0.406.21
Clamping Spring 8, stainless
Product #: 0.0.494.73
Corner-Fastening Set Clamp-Profile 8 32×18
Product #: 0.0.494.74
Roller for Corner-Fastener 8 32×18
Product #: 0.0.626.00
Safety Hanger 8/8
Product #: 0.0.494.76
Hinge 8 for Corner-Fastener 8 32×18
Product #: 0.0.373.23
Multiblock 8 Zn
Product #: 0.0.495.13
Sliding-Door Guide Profile 8 40×10, natural
Product #: 0.0.436.85
Lip Seal 8 2-4mm, black
Product #: 0.0.436.88
Lip Seal 8 4-6mm, black
Fastening Technology
Excerpt from Main Catalogue
Language: English / 中文 Size: 3.9 MB
Download this catalogue